AEO SERVO
EXPANSION X2 is designed for FPV gyro tracking system to extend the
moving range of servo on the camera mount. It changes movement
characteristics of traditional RC servo to meet the movement request of
camera mount. SERVO EXPANSION X2 also can be used in other RC areas,
making servo move in a wide range and adjusting the movement way and
position of Servo directly to control the servo precisely Application Able to adjust
moving buffer and reduce moving impact. For example, can reduce the
image shaking caused by movement of servo in the FPV video transmission
system. Able to adjust the moving range
of servo to reach larger moving angle (such as 180?) or reduce the moving range.
Traditionally if the servo input signal received by receiver exceeds the
standard, the receiving system will disorders (such as signal lost and
so on). Before this, can do the signal expansion. Able to calibrate and trim the
midpoint of servo quickly. In a FPV system, as the midpoint of servo may
be different from that needed in practical use, this product can meet
this need to calibrate and trim it. Setting
introduction: Supply power and
press setting button 5 seconds to enter into setting mode. LED flashing
means main setting menu opened.
When you adjust
the options you need a good, long press the button automatically save
and exit this menu and switch to the next big menu options. When you
come after all the power can be adjusted. the LED flashes
as above table shown in the main menu.? Flashing
once means function 1, flashing twice means function 2, and so on. Jump
to the next option by pressing the button no more than 1 second and
choose this one by pressing it no less than 3 seconds. Save and exit
menu by pressing the button for a long enough time after setting
completed, the next option in the main menu opened at the same time. Turn off the
power after all adjusted well. Function
introduction: Flashing once:
moving buffer. Moving buffer
function can balance the movement of servo to reduce the shake and
smooth the movement. For example, need to increase the buffer and reduce
the shake when carrying a large camera. After entering
into this option, That flashing once means no buffer and flashing ninth
means the largest buffer. Our warranty/ return / exchange policy is very simple. If the item we sent you is defective when you received the shipment from us (NOT AFTER USE), you can report to us by email for return / exchange / refund arrangement. Request(s) for return or exchange and report(s) of missing or damaged part(s) must be received within 30 days of your receipt of merchandise(s). We reserves the rights to entertain requests received thereafter. Items returned must be in as-new conditions with the packing slips, manuals, accessories and all other items intact in original packaging. Returned merchandise must be received from our customer before we will process and ship out any replacement. All merchandise should be returned to us by shipping carriers with safe method which provides proof of shipment (just in case your item does not reach us. so you can check with your local shipping carrier.) We will not responsible for the lost of returned merchandise in shipping. Shipping and handling charges for all orders are non-refundable, as we have paid the Post Office to send the shipment and the Post Office will NOT refund the postage cost back to us after they processed the shipment. Customer will be responsible for the return shipping cost to send return back to us. For returned merchandise that is found to be genuinely defective, we ship out replacement for free (we pay for the replacement shipping cost) and will not charge additional shipping and handling fees. We reserves the right to return merchandise to its customer and not refund money, if we in our opinion deem that the merchandise has been used, crashed, abused, misused or modified in any form, or has been damaged by water, dust, or other contaminants. *** All items are tested by manufactures to make sure they are working properly before we ship them to our customers. *** If you used / flew the product, or crashed product, no matter what the reason. We are sorry but we can not be responsible for your crash or use. Hobbypartz.com will not be responsible for incidental or consequential damages including bodily injuries and property damages arising from the use of any product(s) that it sells. Hobbypartz.com reserves the right to refuse service to anyone. Remote controlled products and accessories can be very dangerous. Please read the operating manual before use. We have no control over the correct use, installation, application, or maintenance of our products, no liability shall be assumed nor accepted for any damages, losses or costs resulting from the use of the products. Any claims arising from the operating, failure or malfunctioning etc. will be denied. We assume no liability for personal injuries, property damages or consequential damages resulting from our products. We reserves the right to amend this policy without further notification(s). To experience 5-Star Customer Service & Tech Support from HobbyPartz.com, visit us at RCDiscuss.com
|